View as Grid List
Sort by

Floatation Cushion

U.S. Coast Guard approved type IV throwable device. Constructed of 200-denier nylon fabric outer shell with polyethylene foam inner core for buoyancy. 15" X 16" X 2 1/2". Made in USA

Mustang Tournament Vest

Designed and tested by professional anglers, the Mustang Tournament Life Vest leads speed-rated flotation into a whole new level of quality and comfort. Designed specifically for fishing, it blends functional safety with luxurious comfort.

Ranger Mustang Elite Jacket

It’s time to push the limits of performance without compromise. Built on a revolutionary 3D chassis, the Elite™ Inflatable PFD stays put at high speeds, lets you move the way you want and needs to and provides automatic inflation powered by Hammar® Hydrostatic Inflator Technology. Aerodynamic 3D chassis reduces drag at high speeds. Wicking mesh liner improves breathability. Wide shoulder system eliminates neck fatigue. Shaped for optimum mobility and all-day comfort. Lightweight fabric shell, also used in the body armor industry. Hydrostatic Inflator Technology, will automatically inflate when immersed in 4” or more of water. Sleek inflation handle prevents unnecessary interference or snag. Intuitive dual side adjustments, d-ring, 1.5” buckle. USCG Type II Recreational (Pending) /USCG Type V Commercial (Pending). Provides 28lb (125N) buoyancy when inflated - more than 1.5 times the buoyancy of standard foam PFDs. PLUS decorated with Ranger Boats embroidery on right chest.

Ranger Boats Beach Towel

Ranger Boats Beach Towel made using soft and absorbent 50% cotton loop terry that reverses to an ultra-smooth microfiber fabric. Featuring a fully dye sublimated design, Ranger Comanche logo in red and white.

Ranger LIT Cooler

Ranger 22 quart LiT Cooler is built to perform all day and all night. Cooler features including:
- Night-Sight® technology fully illuminates the contents of your cooler with an unbelievably bright, removable/rechargeable LED liner.
- Heavy-duty, roto-molded construction including; sure-grip nylon rope handles, marine latches and a heavy-duty hinge system.
- Built-in anchor points, you don’t need an accessory in order to attach a ratchet strap hook or tie down.
- Ice retention for days is an obvious requirement, but LiT Coolers go one step further with a 2 ½ inch thick lid, easy release rubber seal, and four impact resistant LiT ice legs to ensure the goods stay chilled.
- Oversized rubber feet provide greater ground clearance and stronger grip on smooth or wet surfaces.
- Deep enough to close lid with drink bottles standing upright

**5 Year Cooler Warranty, 1 Year Night-Sight® LED Liner Warranty** 100% Waterproof
**Additional Shipping charges apply to this product**


Bait Bar

Developed for the Professional Tournament Trail by fishing experts, this device allows you to hang spinnerbaits and jigs underneath storage lids and other easily accessible locations on your boat. Made of lightwight aluminum, it measures 16" in length with 21 pre-drilled holes. Mount with included 3M™ double-sided tape. May also be mounted with screws (not included).

12" Pro Model Rod Holder

Don't sacrifice another rod. Secures up to three rods, keeping them out of the way while you're underway. Black nylon strap without foam insert.

Rod Glove, Casting, Extra Large

For Micro Guide Casting Rods - 7.5' to 8' - The material used for these Rod Gloves is made with an extra tight weave to prevent micro guides from popping through the expandable mesh. The expandable diameter of 5/8" to 1 5/8" allows you to slide this Rod Glove easily over your casting rods. No more fighting the sleeve over the last line guide.This style of Rod Glove is the nicest fit for casting rods on the market today! Customized with the Ranger Boats logo in black. 6.0', For Casting Rods Up To 8'

Rod Glove, Casting, Standard

For Micro Guide Casting Rods - 6.5' to 7.5' - The material used for these Rod Gloves is made with an extra tight weave to prevent micro guides from popping through the expandable mesh. The expandable diameter of 5/8" to 1 5/8" allows you to slide this Rod Glove easily over your casting rods. No more fighting the sleeve over the last line guide.This style of Rod Glove is the nicest fit for casting rods on the market today! Customized with the Ranger Boats logo in black. Rod Glove, CASTING "STANDARD", 5.25', For Casting Rods Up To 7'6"

Trolling Motor Saver Strap

There’s no point in letting your trolling motor bounce around unsecured or risk losing it to the bottom of the lake when
Ranger’s Trolling Motor Saver is so inexpensive and easy to use. A great gift for the fisherman who has almost everything.
Made of sturdy nylon and adjustable from 9 to 18 inches.

    Holds trolling motor in place
    Reduces bouncing on the water or when trailering your boat
    Ideal for rough water conditions


Ranger 15' Dock Line

Premium solid braid dock lines with pre-spliced loop on one end. UV protected to prevent fading, mildew and rotting. Resistant to oils, grease and saltwater. Featuring the Ranger Boats logo. 3/8" x 15'.

Aluminum Boat Bumper

Designed to fit on smaller aluminum fishing boats with smooth gunwales.

Boat Bumper - Inflated

The best protection for your Ranger's gunwales and rub rails against high dock collisions. These low freeboard bass boat bumpers, manufactured by Taylor Made Products, are made from specially formulated, tough marine-grade vinyl and feature an inflation valve for air pressure adjustment. 5" Diameter, 14" Length. Works great with the Ranger Bass Boat Bumper Mount (sold seperately). Made in USA.

Boat Bumper Mount

It's now even easier to secure your bass boat with Ranger "Bass Boat Bumper" mount. Designed without ropes, the mount allows for flexibility in protecting your boat while docking and can be placed at touch points regardless of cleat location. Constructed of high-density polyethylene and backed with closed cell foam. For optimal use with the Bass Boat Bumper (sold seperately). Made in USA.

Fiberglass Boat Bumper

Polyethylene backed with closed cell foam and held in place by slotted action suction cups. Attach at touch points on your boat regardless of cleat location. Fits all Ranger Boat models. We recommend 2 per boat. Made in USA.


POWERStick-53" is what the pros use to mount & provide constant power to their GoPro®, VIRB, other action cameras or your phone too. If you’re tired of dead GoPro batteries and want a secure mount that makes it feel like you have a "Cameraman" on your boat, get POWERStick-53”. Plugs right into your navlight port on back or front of your boat and no tools required! It converts 12volt from the navlight port to 5volt USB to POWER YOUR GoPro® ALL DAY LONG! Very little impact on your cranking battery, so no fear of that battery dying either. Extends from approx. 32.5" to 53" with a ball & joint mount for great points of view. Made from beautifully anodized aircraft grade aluminum with dual channels for strength. Get video of you catching the biggest fish of your life, get POWERStick-53"

Shallow Water Anchor Travel Cover

Black premium neoprene Shallow Water Anchor travel cover. Customized with Ranger Boats in white on one side. Protect your Shallow Water Anchor while on the road. These neoprene covers fit securely over your Shallow Water Anchor and attaches with a snap at the bottom. Fabric cover will not scratch the finish and covers will not move while traveling. The covers are vented with a mesh window to prevent air-buildup or twisting at highway speeds. Tailored fit ensures that your anchor will not drop while the cover is in place. Model to fit: 8' Blade Side Anchor on boat: Starboard (right) Port (left)

Motor Support Stiks

Outboard motor support, fits over trim rams. Supports your 150hp and up Mercury or Yamaha outboards while trailering, takes the pressure off of hydraulic system. Strong aluminum tubing with molded ends. Safe for salt or fresh water. Not intended for use with Evinrude Motors. Stick is 8 ¾” inches. Sold in sets of two.

Prop Wrench

Prop master propellor wrench, fit's 1-1/16" prop nuts, rugged nylon material, resists stripping. BONUS garboard drain plug socket on back side.

Steer Stop Hydraulic Steering Lock

Locks hydraulic steering when trailering, prevents damage to motor supports and hydraulic system. Snaps onto hydraulic steering rams. 4" Long. Made in USA.

Telescoping Extra Torque Lug Wrench

Fits all wheel types and is compact for easy storage. Made of chrome vanadium heat treated steel with deep thin-wall dual sockets. Includes a storage pouch. Fits four most common sizes: 17mm, 21mm, 19mm, 22.2mm.

Fish Guardian "L" Bracket

Accessory to mount the Fish Guardian tank onto your boat battery compartment floor. Perfect for boats with no sidewalls or battery compartments with limited space to mount Fish Guardian tank. Bracket comes with pre-drilled holes and mounting bolts ready to install.

Adjustable Pedestal Seat

Adjusting from a completely flat position to 90 degrees upright, the control post guarantees complete custom-like comfort during even the longest days on the water. The secret to its unmatched adjust-ability is an innovative ball mount. Simply loosen a friction knob on the rear of the mount and effortlessly position the cushioned seat anywhere you desire, upright for superb lower back support or at an angle to take pressure off your legs. The die-cast aluminum power rise pedestal offers instant height adjustment at the touch of a two-way lever. It's machined to .002 tolerance for wobblefree performance. Adjusts From 30″ To 36-7/8″, Deck To Bottom Of Seat. Plugs securely into any spring-lock base that accepts a 1.77" pedestal post. TAN ONLY.

Ranger Pedestal Seat Base Plug

Eliminate lost hooks and other small items with the Ranger Pedestal Seat Base Plug. Conveniently covers up and plugs securely into all seat bases that accept a 1.77” pedestal post. Lift tab allows for easy access. For any non-bass boat models the plug will only be useful for the front and rear casting decks.

Share Your Adventures!